JNLE: New Fueling System

Some late update here.... All this pictures was taken at few weeks ago, there are few items have been installed to my Hippo such as Nismo fuel pump, Pitwork fuel filter, 700cc SARD top feed injector and TPS(Throttle Position Sensor). The reason to install a new TPS because I suspect old TPS is time to gone, my MFD show the throttle reading is 4-5% when idle, its suppose 0% in normal condition. We try to adjust the old TPS but still can't make it 0%, in the end I have to change to the new TPS(lucky I bought one from Tom) and the Throttle reading is sit at 0% now~

Although ECU have been re-tune and replace to new TPS, but life never turns out the way that we expect, the stalling problem still exist and it become worst, it can't even start the car when engine warm!! The mechanic re-inspect the fueling system, ground cable, ECU, coil relay, coil plug, spark plug, vacuum hose and o2 sensor, all this items are still in good condition.... Until the end he proceed to AAC valve, the problem is finally solved after adjust the valve idle screw~ Car is test on the road again and again for few days, stalling problem never exist again and the car run very smooth and responsive~ Have a big thanks to Art(sorry if wrong spelling), the mechanic of Formula MB, thanks for his patient to help me inspect so many things and source out the problem~ Thank you!

Ready for dyno tune...